Symbol Technologies CDM-8910WW Power Connection, Battery Talk Times, Battery Standby Times

BATTERY USAGE

CBATTERY CHARGING

H

1POWER CONNECTION

1Plug the AC Charger into a standard outlet.

2Plug the other end of the AC Charger into the bottom of your phone. The battery must be installed on the phone.

• The battery is not charged at the time of purchase.

•Fully charge the battery before using it for the first time.

•It is more efficient to charge the battery with the handset powered off.

•The battery must be connected to the phone in order to charge it.

•Battery operating time gradually decreases over time.

•If the battery fails to perform normally, you may need to replace the battery.

•Phone LED will light red and “Charging...” will be displayed on the screen while charging is in progress.

•Phone LED will light green and “Charging is complete!” will be displayed on the screen when the battery is fully charged.

•Typical charge times for a full charge.

Standard Batteries : 2~3 hours/Extended Batteries : 3~4 hours

BATTERY USAGE

BATTERY TALK TIMES					C
					H
The operating time is subject to your handset usage and configuration.
					1
	Battery Capacity	CDMA	PCS	AMPS
	STD 1000 mAh	200 m	190 m	80 m
	EXT 1700 mAh	330 m	330 m	130 m

BATTERY STANDBY TIMES

The operating time is subject to your handset usage and configuration.

Battery Capacity	CDMA	PCS	AMPS
STD 1000 mAh	107~190 hours	150~250 hours	20 hours
EXT 1700 mAh	160~220 hours	380~450 hours	35 hours

These times are for a new battery. Talking and Standby time may decrease over time.

12 13