5-50
LS 400Xi Product Reference Guide
Buffer Data
To buffer data, Code 39 buffering must be enabled, and a symbol must be read with a space
immediately following the start pattern.
tUnless symbol overflows the transmission buffer, the unit gives a lo/hi beep to
indicate successful decode and buffering. See Overfilling Transmission Buffer.
tUnit adds the message, excluding the leading space to the transmission buffer.
tNo transmission occurs.
Clear Transmission Buffer
To clear the transmission buffer , read a symbol which contains only a start character , a dash
(minus), and a stop character.
tUnit issues a short hi/lo/hi beep to signal that the transmission buffer has been erased,
and no transmission has occurred.
tUnit erases the transmission buffer.
tNo transmission occurs.
CLEAR BUFFER