6
PDT 8100 Series
with Windows Mobile
2003 for Pocket PCs
2. Remove the flash card cover at the top of the battery compartment
by pulling the top out, and lifting the cover up.
3. Insert the flash card into the compartment with the pins facing for-
ward, and the main label facing down. It only fits one way. The two
metal tabs on the locking mechanism will prevent you from pushing
the card all the way in.
4. To fit the card into place, push down and in at the same time, so that
the lip of the compact flash card slips under the tabs of the locking
mechanism.
5. Replace the flash card cover by inserting the bottom first, and press-
ing the top in.
Note: After you insert or remove a compact flash card, you must re-
place the flash card cover or the terminal will not function.
6. Reinsert the battery and battery door.
7. Perform a soft reset (see Performing a Soft Reset on page 25).
Removing a Compact Flash Card
1. Open the battery door and remove the battery and flash card cover.
2. Use the stylus to press the flash card release button inside the flash
card compartment.
Compact flash
card cover
Pull top out & lift cover Insert flash
card
6598801a.fm Page 6 Monday, December 8, 2003 2:01 PM