- 22 - EN
9J27

TO CANCELAN AUTOMATIC TIMER

RECORDING

•After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 20 and select a
program you want to cancel.
3)Press the T-PROG. CLEAR button.
4)Press the MENU button on the remote control to
return to TVmode.
•While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the TV/VCR.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator
goes off.
2)Press the MENU button on the remote control.
3)Confirm “TIMER PROGRAMMING” is pointed.
4)Press the F.FWD/Bbutton. The details of pro-
grams appear on the TVscreen.
5)Press the MENU button on the remote control to
return to TVmode.
HINTS FOR AUTOMATICTIMER RECORDING
•Make sure the channel you want to record is prop-
erly set in advance.
•It is not necessary to press the RECORD button for
timer recording.
•Recording begins automatically at the Start time.
•If you are recording using a Timer mode, you may
not operate the unit manually.
•The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
•If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, and the tape will be ejected.
AUTO RETURN
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1Select “USER’S SET UP”
Press the MENU button on the
remote control.
Press the PLAY/Kor STOP/Lbut-
ton to point to “USER’S SET UP”.
Then, press the F.FWD/Bbutton.
2Set “AUTO RETURN”to [ON]
Press the PLAY/Kor STOP/Lbut-
ton to point to “AUTO RETURN”.
Press the F.FWD/Bor REW/s
button until [ON] appears. Then,
press the MENU button on the remote control to
return to TVmode.
3Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTE:
•If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4Watch the recorded program
Press the PLAYbutton.

TO CANCEL THE AUTO RETURN

MODE

Repeat steps [1] and [2], select [OFF] using the
F.FWD/Bor REW/sbutton. Then, press the MENU
button on the remote control to return to TVmode.
If there is a powerfailure of any kind, the unit
will retain its memory forthis feature.
– USER’S SET UP–
RENTAL [OFF]
REPEAT PLAY [OFF]
BAUTO RETURN [ON]
WAKE UPTIMER
The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
•Use the remote control forthis procedure.
•Clock must be set to the correct time before setting
the timer.
•If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1Select “WAKE UP TIMER”
Press the WAKE-UP/SLEEPbutton
on the remote control once, and
confirm “ON/OFF” is pointed.
Press the F.FWD/Bor REW/s
button until [ON] appears.
2Select “TV”or “TAPE”
Press the PLAY/Kor STOP/Lbut-
ton until to point to “TV/TAPE”.
Press the F.FWD/Bor REW/s
button, and select [TV] or [TAPE].
WAKE UPBON/OFF [ON]
TIMER TV/TAPE [TV]
TIME [12:00AM]
WAKE UP ON/OFF [ON]
TIMER BTV/TAPE [TV]
TIME [12:00AM]
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
BUSER’S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH