Symphonic SC720FDF owner manual Clock SET UP, TV Operation and Settings, Automatic Clock Setting

B MANUAL CLOCK SET D.S.T.

TV/VCR SECTION

TV OPERATION AND SETTINGS

CLOCK SET UP

Set the unit clock correctly for VCR timer TV/VCR recording. We suggest that you should

set the clock manually when you first set up the unit, then set the auto clock setting to "ON" to cor- rect the time periodically.

NOTE:

•If you cannot receive a station with time signals, auto clock setting is not available. Use manual setting only.

AUTOMATIC CLOCK SETTING

NOTES:

•If a cable converter box is being used, make sure it is turned on.

•You must use the remote control for the clock setting.

•If the unit is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself and the unit must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to enable to set up or correct the clock automatically.

MANUAL CLOCK SETTING

In the example below, the clock is to be set to:

DATE:	May 5th, 2006
SETTING TIME:	5:40PM
1 Press [SET-UP].		- TV/VCR SETUP -
Use [K / L] to point to		TIMER PROGRAMMING
		B SETTING CLOCK
"SETTING CLOCK", then		CHANNEL SET UP
		USER’S SET UP

1 Press [SET-UP].	- TV/VCR SETUP -
Using [K / L] select "SETTING	TIMER PROGRAMMING
	CHANNEL SET UP
	B SETTING CLOCK
CLOCK", then press [ENTER].	USER’S SET UP
	V-CHIP SET UP
	LANGUAGE [ENGLISH]
2 Press [ENTER] to select "ON".	CAPTION [OFF]
	ZERO RETURN
	INDEX SEARCH
	TIME SEARCH
	– SETTING CLOCK –
	B AUTO CLOCK	[ON]
	AUTO CLOCK CH SEARCH
	AUTO CLOCK CH	[ 02 ]
	MANUAL CLOCK SET

press [ENTER].	V-CHIP SET UP
	LANGUAGE [ENGLISH]
	CAPTION [OFF]
	ZERO RETURN
2 Use [K / L] to point to	TIME SEARCH
	– SETTING CLOCK –
	AUTO CLOCK	[ON]
"MANUAL CLOCK SET", then
	AUTO CLOCK CH SEARCH
press [ENTER].	AUTO CLOCK CH	[ 02 ]

3Press [L] to select

"AUTO CLOCK CH SEARCH". Then press [ENTER].

• The unit begins searching for

the station which contains the

– SETTING CLOCK –

AUTO CLOCK [ON]

BAUTO CLOCK CH SEARCH

AUTO CLOCK CH [ 02 ]

MANUAL CLOCK SET

D.S.T.[OFF]

• If there is no local PBS station in your area or on your cable sys-

[OFF]

auto clock set signal. The

search for a signal may take up

– AUTO CLOCK CH SEARCH –

08 10 13

tem, select "AUTO CLOCK" and press [ENTER] to turn "OFF" the function before this step.

3 Use [K / L] to set your	– MANUAL CLOCK SET –
desired month, day, year, hour	MONTH DAY	YEAR

to 20 seconds per channel.

• When the search has finished,

"_ _" appears at the lower left of

the screen.

_ _

and minute.	0 5	/ 0 5 FRI 2 0 0 6
Use [s / B] to move to	HOUR	MINUTE
	0 5	: 4 0 PM
another item.

4 Press [SET-UP].

Although seconds are not	5:40 PM
displayed, they begin counting
from 00 when you press
[SET-UP]. Use this feature to
synchronize the clock with the correct time.

NOTES:

•During AUTO CLOCK CH SEARCH, the picture may be distorted.

•If no number appears on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on this page.

4Write down the numbers that appear on the screen. They are the auto clock stations in your area.

NOTE:

•When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

5Press [RETURN] to go back to "SETTING CLOCK" menu. Press [L] to select

"AUTO CLOCK CH".

Use [s / B] until you locate an auto clock station number.

– SETTING CLOCK –

AUTO CLOCK	[ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH	[ 08 ]
MANUAL CLOCK SET
D.S.T.	[OFF]

1Follow steps 1 to 2 above.

2Select the item you want to change using [B].

3Enter correct numbers using [K / L].

4Press [SET-UP]to start the clock.

6Press [SET-UP]to exit the menu.

NOTE:

•Once the unit is turned off, it will periodically check and set the correct date and time.

10

EN