Symphonic WF32L6 owner manual Switching External Input

SWITCHING EXTERNAL INPUT

When you connect external devices including a DVD player and home audio system, you can easily switch the input mode with the remote control.

POWER	SLEEP	INPUT
		SELECT

1	2	3
4	5	6
7	8	9	AUDIO
			STILL
-	0
SETUP			SCREEN
			MODE
		ENTER
BACK			INFO
	CH RETURN
VOL.		MUTE	CH

1Switch the input mode.

•When you press [INPUT SELECT] or [CH

K/L] on the remote control, the input mode will be switched as below.

TV/DTV channel

Video1

Video2

Component1

Component2

HDMI

: press [CH K]

•To use the VIDEO1 or S-VIDEO1 input jack on the TV, select “Video1”.

•To use the VIDEO2 or S-VIDEO2 input jack on the TV, select “Video2”.

•To use the COMPONENT1 input jacks on the TV, select “Component1”.

•To use the COMPONENT2 input jacks on the TV, select “Component2”.

•To use the HDMI IN jack on the TV, select “HDMI”.

20

•When you press [INFO], the current external input mode, the type of resolutions for video signal, TV aspect ratio, CC and TV rating will be displayed at the top-right of the screen.

1) When using VIDEO1 or S-VIDEO1 input jack

Video1

480ii SD

TV-PG DLSV CC

2) When using VIDEO2 or S-VIDEO2 input jack

Video2

480ii SD

TV-PG DLSV CC

3) When using COMPONENT1 input jacks

Component1

1080ii HD

NONE

4) When using COMPONENT2 input jacks

Component2

1080ii HD

NONE

5) When using HDMI IN jack

HDMI

1080ii HD 16:9:9

NONE

•The information display will automatically dis- appear in one minute.

EN