Symphonic WF719 owner manual Connecting to a Dolby Digital Decoder for DVD

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)

If using this TV/DVD/VCR to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD/VCR outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hook- ing the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with pow- erful and high-quality surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail for the audio connections.

Center

speaker

Front speaker (left)

Dolby Digital decoder

Surround

speaker (left)

Front speaker	ANT.
(right)
		COAXIAL
		To DIGITAL AUDIO OUT
To COAXIAL DIGITAL		(PCM/BITSTREAM)
AUDIO INPUT jack		COAXIAL jack
Surround	Subwoofer
speaker
(right)
		[Fig. 7]

NOTES:

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VCR.

•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 45 to set DOLBY DIGITAL to ON.)

•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD/VCR using incorrect settings may generate noise distortion, and may also dam- age the speakers.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

- 14 - EN

1C29