Symphonic WF719 owner manual Hints for Automatic Timer Recording, Auto Return, Sleep Timer

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the RECORDING indicator goes off.

2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs

appear on the TV screen.

5)Press the SETUP button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

TV/VCR

•Make sure the channel you want to record is prop- erly set in advance.

•It is not necessary to press the RECORD button for timer recording.

•Recording begins automatically at the Start time.

•If you are recording using a Timer mode, you may not operate the TV/VCR/DVD manually.

•The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).

•If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.

•If the tape runs out before the end time, the TV/DVD/VCR will switch to the Stop mode immediately, and the tape will be ejected.

AUTO RETURN

TV/VCR

With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

3Auto Return will begin

When all the timer recordings are completed, the TV/DVD/VCR will rewind to the beginning of the recorded program(s).

NOTE:

•If you press the POWER button while tape is rewinding, the Auto Return will stop.

4Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the ENTER button.

If there is a power failure of any kind, the TV/VCR/DVD will retain its memory for this fea- ture.

SLEEP TIMER

TV/VCR

The Sleep Timer function turns off the TV/DVD/VCR without using the POWER button after a desired period of time.

NOTE:

•This function does not operate during Recording mode.

1Select “SLEEP TIMER”

Press the SLEEP button on the remote control until “SLEEP TIMER” appears.

2Set sleep time

Press the SLEEP button until your desired sleep time appears.

1 Select “USER’S SET UP”

- TV/VCR SETUP -

TIMER PROGRAMMING

Each additional push will increase the time by 30 minutes up to 120

Press the SETUP button on the

SETTING CLOCK CHANNEL SET UP

B USER’S SET UP

V-CHIP SET UP

minutes.

SLEEP 120 MINUTES

remote control.

Press the Arrow button K or L to

point to “USER’S SET UP”.

Then, press the ENTER button.

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

After 5 seconds, exit the Sleep Timer setting.

TO CANCEL THE SLEEP TIMER

Press the SLEEP button on the remote control until “SLEEP TIMER” appears. Press the SLEEP button

2 Set “AUTO RETURN” to [ON]	– USER’S SET UP –
Press the Arrow button K or L to	RENTAL	[OFF]
point to “AUTO RETURN”.
	REPEAT PLAY	[OFF]
	B AUTO RETURN	[ON]
Press the ENTER button until [ON]	VCR AUDIO	[HIFI]
	TV AUDIO	[STEREO]

appears.

until “SLEEP 0 MINUTES” appears.

- 34 - EN

1C29