STEP 11

ZEKTOR

1

2

3

7BLINKS

STEP 12

ZEKTOR

1

2

3

 

 

 

 

11 After a pause, the Power indicator blinks 7 times, and repeats.

Press the key on your remote that you want to use as the new key for POWEROFF.

12 The MAS3 will return to the standby mode indicating a return to normal operations. The newly programmed codes will now operate your MAS3.

Remote Control Learning Caveats

Some component’s control codes will work better than others. We’ve designed the MAS3 to work with a great majority of codes, however a few brands use non-standard ways of transmitting their component’s codes that may not be compatible with the MAS3. In these somewhat rare circumstances you will have to program your remote control to a different manufacturer’s code, and/or use different buttons on your remote.

When programming the MAS3, if the IR indicator light blinks, and the MAS3 moves on to the next step, then the remote controller’s key code has been accepted. If the IR indicator does not blink, it indicates the MAS3 does not understand that particular manufactures code and you will have to choose another.

In some cases the remote key code will be accepted, however the range will be limited. If the range of a programmed key is unacceptable, you will have to choose a different manufacturer and try again.

10