Learning New Remote Codes

Teaching the MAS3 to use new remote control keys

If your remote does not have one of the pre-programmed component codes, or you simply want to re-map the MAS3 functions to other keys on your remote, the MAS3 can be taught to use new keys.

To teach the MAS3 to respond to new keys, you need to have the remote control(s) you want to use ready, and setup in the manner you want it to be used.

STEP 1

1 Place the MAS3 in standby mode. This is the factory default mode

 

on power up, and if it has not been changed, you can unplug the

 

mlugin se 16.34.114 TD 0.003 T1c 0.0006 l f[(m)4willwerin stain nd

8