Talk Electronics
Thunder User Manual
INTRODUCTION
Thank you for choosing a Talk Electronics Thunder CD player. We are confident that it will provide you with many years of musical enjoyment and reliable service. However, please take the time to read this guide thoroughly before using the amplifier. It explains how to install and connect it, and suggests how to ensure that you always enjoy its optimum performance.
UNPACKING LIST
CD player
Remote control handset
AC power cord
Instruction manual
NOTE: We recommend that the supplied AC power cord is replaced with a high quality Merlin Cables power cord for best results.
Please be aware that this unit is not supplied with interconnects and we recommend the use of the Merlin series of interconnect cables.
INSTALLATION INSTRUCTIONS
HOW TO SITE AND CONNECT YOUR THUNDER CD PLAYER
FOR BEST PERFORMANCE AND SAFE OPERATION
Please unpack your CD player carefully and position it on a stable, level surface close to a mains socket. Before attempting to connect it into your system please read this manual carefully.
The Thunder will perform well placed on a coffee table or bookshelf but if you wish to achieve the best performance we suggest you place it on a specialist
Position the CD player so that it will not be subjected to high ambient temperatures: avoid sites where it will be in direct sunlight or close to a central heating radiator. For your own safety – and your CD player’s
Once you have installed your CD player please retain all packaging including the polythene bag which is designed to protect the finish of the unit whilst in transit. If you decide to upgrade or add a Whirlwind power supply, the packaging will be required to protect the Thunder and ensure it arrives undamaged at the factory or your distributor.
SAFETY
The Talk range of CD players contains Class 1 laser optics. You must never remove the lid from a player and look into the laser while it is operating: this could damage your eyes.
ELECTRICAL CONNECTIONS
The Hurricane comes with a ready assembled mains lead and we suggest that you use this to connect it to the mains supply. We strongly recommend that you connect the lead directly to a wall socket and do not use extension blocks, which degrade sound quality. For the same reason we also advise against “line filters” and “mains conditioners”. If your mains supply is noisy or you have household appliances that generate clicks and pops that can be heard through your
Should you need to replace the fuse in the mains plug, please fit only the correct replacement types. This is a standard 5A.
If, for any reason, you wish to replace the plug or cable, please note that the lead must be connected as follows.