Tally Genicom T2265, T2280 manual Online Tractor1 Load

Paper handling Quick start-up

Open the coloured latch lever of the right-hand tractor and align it to the paper width.

Insert the fanfold paper into the right-hand tractor.

Make sure that it is inserted by the same length as on the left- hand tractor in order to avoid any paper jam.

Close the tractor flap and lock the tractor by turning the trac- tor lever to the rear.

Do not tighten the paper excessively to avoid tear- ing the perforation holes; do not allow excessive slack or the paper will not remain flat enough to en- sure accurate feeding.

90

Be sure to align the paper stack in parallel with the printer and that the paper flow is unobstructed.

Online Tractor1 Load

1 2 3 4

Online

Setup

Re-install the bottom cover. Lower the front cover.

Switch the printer on. The active paper source (Traktor1) appears in the dis- play. The paper is automatically loaded when the printer is in online mode and receives data from the computer.

Press the Load (4) key to load paper before starting the printout.

16