Care

All the motors in the HV are permanently sealed and do not require oiling. To keep dirt, dust and debris from the fans we recommend that you periodically remove the grille from within the living space and dust the fan blades. Please remember to make sure that the fan

is OFF before dusting the fan blades.

Troubleshooting

HV1000: The most common problem with the HV1000 is caused by incorrect wiring. Before

you check anything else make sure: WHITE wire in HV1000 is connected to 115 VAC Line Neutral; RED wire in HV1000 is connected to 115 VAC Line Hot (Constant Hot Feed); BLACK wire in HV1000 is connected to a switch that will make it hot when the switch is closed. HV1600: If the wireless remote fails to activate the fan, the battery may need replacing. The transmitter uses a type A23/12V battery. Remove the back plate from the transmitter and remove the battery. Following the markings, replace the battery. Secure the back

plate to the transmitter.

Re-programming the HV1600 Remote

Remove the cover from the control box

Push the Brown #1 button on the side of receiver for 3 seconds…the Green LED light will flash quickly

While the Green LED is flashing push the “1” button on the transmitter… the Green LED light will flash… this programs ON/OFF

Push the Red #2 on the side of the receiver for 3 seconds…the Red LED light will flash quickly

While the Red LED is flashing push the “2” button on the transmitter… the Red LED light will flash… this programs HI/LO

Replace the cover on the control box

Switch

Doors

Fans

Possible Cause

Try

 

 

 

 

 

On

Do Not Open

Do Not Run

No Power

Check connections and circuit breakers

 

 

 

 

 

On

Do Not Open

Do Not Run

No constant power on Red

Check wiring connections. There must be

(audible “click”)

 

 

 

constant power on the red wire.

 

 

 

 

 

Off

Do Not Close

Stop

RED and BLACK are connected

Check wiring connections. Connections at the

 

 

 

together.

fan must be made individually.

 

 

 

 

 

On

Both Open

One Fan Runs

Something blocking fan rotation

Turn the power off and check for foreign

 

 

 

 

matter blocking blade rotation.

 

 

 

 

 

On

Both Open - One

One Fan Runs

Door motor gears or switch may

Remove fan from between joists and test

 

closes then

 

have been stressed during

operation while fan is sitting on top of joists. If

 

opens...

 

installation. Framing opening may

the fan operates, enlarge the opening and

 

 

 

be too small.

return the fan to installed position.

Off

Both Closed -

Stop

Door motor gears or switch may

Remove fan from between joists and test

 

One opens then

 

have been stressed during

operation while fan is sitting on top of joists. If

 

closes...

 

installation. Framing opening may

the fan operates, enlarge the opening and

 

 

 

be too small.

return the fan to installed position

 

 

 

 

 

If for some reason the lift arm becomes detached from the door bracket it can easily be re-attached. Inspect the pin for damage and replace if necessary. Cycle the whole house fan until the doors are in the open position. Support the door and simply push the lift arm over the tapered end of the pin.

LIMITED WARRANTY If, within the period of three years from the date of purchase, the HV 1000 or HV 1600 (the Product) is defective or malfunctions in normal home use, Tamarack Technologies, Inc. will repair or replace the Product, at its discretion. Customer is responsible for shipping charges. NOTE: Some states codes require fans to be hardwired. Hardwiring of the HV1600 will not void warranty provided the wiring is performed by a licensed electrician.

CONDITIONS, EXCLUSIONS, AND LIMITATIONS -This Warranty is subject to the following conditions, exclusions and limitations:

THIS WARRANTY DOES NOT COVER PROBLEMS RESULTING FROM INSTALLATION, OPERATION OR MAINTENANCE THAT HAS BEEN UNDERTAKEN OTHER THAN IN ACCORDANCE WITH THE INSTRUCTIONS. THIS WARRANTY DOES NOT COVER PROBLEMS RESULTING FROM DEFECTS IN OR CAUSED BY ASSOCIATED EQUIPMENT (FURNACES, SOLARIA, ETC.); FROM REPAIRS OR MODIFICATIONS ATTEMPTED BY PERSONS OTHER THAN TAMARACK TECHNOLOGIES, INC.; FROM ABUSE, ACCIDENTAL OR SHIPPING DAMAGE OR ACTS OF GOD. THIS WARRANTY DOES NOT APPLY TO THE PRODUCT USED OUTSIDE THE UNITED STATES, ITS TERRITORIAL POSSESSIONS, AND CANADA. EXCEPT AS SET FORTH ABOVE, NO EXPRESS OR IMPLIED WARRANTY IS GIVEN OR AUTHORIZED BY TAMARACK TECHNOLOGIES, INC. AND ALL OTHER SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. ANY WARRANTY OR MERCHANTABILITY OF FITNESS FOR ANY PARTICULAR PURPOSE SHALL BE LIMITED TO THE WARRANTY HERE- UNDER. MOREOVER, ANY LIABILITY OF TAMARACK TECHNOLOGIES, INC. FOR THE PRODUCT SHALL BE LIMITED TO THE REPLACEMENT VALUE OF THE PRODUCT. IN NO EVENT SHALL TAMARACK TECHNOLOGIES, INC. BE LIABLE FOR ANY INCIDENTAL DAMAGES OR FOR ANY CONSEQUEN- TIAL PROPERTY OR COMMERCIAL DAMAGES, IRRESPECTIVE OF THE CAUSE THEREOF, OCCURRING EITHER DURING OR AFTER THE WARRANTY PERIOD, INCLUDING WITHOUT LIMITATION ANY DAMAGES TO ANY PART OF A BUILDING OR ITS CONTENTS. NOTE: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. PROOF OF PURCHASE REQUIRED.

320 Main Street • Buzzards Bay, Ma 02532

508-759-4660 / 800-222-5932 / Fax 508-759-6001

Page 4
Image 4
Tamarack Technologies HV1600, HV1000 manual Care, Troubleshooting

HV1000, HV1600 specifications

Tamarack Technologies has made a significant mark in the world of ventilation and air quality management with its innovative HV1000 and HV1600 models. Designed for both commercial and industrial environments, these high-velocity air movers offer a blend of advanced technology and practical features that enhance performance and efficiency.

The HV1000 model is characterized by its compact design and lightweight construction, making it easy to handle and transport. With a powerful motor that delivers high airflow rates, the HV1000 can effectively ventilate large areas quickly. Its multiple speed settings allow users to customize airflow based on specific needs, ensuring optimal air circulation during various applications. Equipped with a durable housing, the HV1000 is built to withstand rigorous usage, making it an ideal choice for construction sites, warehouses, and other demanding environments.

On the other hand, the HV1600 takes performance to the next level. This model offers a higher airflow capacity and additional features that enhance usability. Designed for heavy-duty applications, the HV1600 comes with a large, adjustable airflow nozzle that allows for targeted air delivery. This feature is especially useful in situations where precise air circulation is required. Additionally, the HV1600 includes a built-in timer, enabling users to set specific operating durations, which is advantageous for energy conservation.

Both the HV1000 and HV1600 incorporate advanced motor technology that not only maximizes airflow but also minimizes noise levels. This makes them suitable for environments where noise pollution is a concern. Furthermore, Tamarack Technologies has integrated user-friendly controls into both models, ensuring easy operation even for those with minimal technical knowledge.

Energy efficiency is another hallmark of these models. Tamarack Technologies prioritizes sustainable design, meaning that both the HV1000 and HV1600 are engineered to consume less power while delivering maximum performance. This feature not only reduces operating costs but also aligns with environmentally conscious practices.

In summary, the HV1000 and HV1600 from Tamarack Technologies are exemplary models of high-velocity air movers that embody the perfect balance of power, efficiency, and user-friendly design. With their robust performance capabilities and advanced features, these units stand out as top choices for anyone looking to enhance air quality and ventilation in various settings.