TCS-3401Owner’s Manual

Chain brake operation (Fig. 2-5)

Chain brake (1) is designed to activate in an emergency such as kick-back action. Please check to verify that it works properly before use.

Application of brake is made by moving the front guard towards the bar. During the chain brake operation, even if the throttle lever is pulled, the engine speed does not increase and the chain does not turn. To release the brake, pull up the chain brake lever.

WARNING!

Do not carry the machine with the engine running.

Stopping (Fig. 2-6)

Decrease engine speed, and push ignition switch to stop position.

WARNING! KICKBACK DANGER (Fig. 2-7)

One of the most severe dangers when working with a chain saw is the possibility of kickback.

Kickback may occur when the upper tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back toward you. Pinching the saw chain along the top of the guide bar may also push the guide bar rapidly back towards you. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury.

Even though your saw has safety built into its design, you should not rely on these safety features exclusively.

Know where your bar tip is at all times.

Kickback does occur if you allow the kickback zone (1) of the bar to touch an object. Do not use that area. Kickback from pinching is caused by a cut closing and pinching the upper side of the guide bar. Study your cut and make sure it will open as you cut through.

Maintain control when the engine is running by always keeping a firm grip on the saw with your right hand on the rear handle, your left hand on the front handle and your thumbs and fingers encircling the handles. Always hold the saw with both hands during operation and cut at high engine speed.

WARNING!

Do not overreach or cut above shoulder height.

WARNING!

Use extra caution when felling, and do not use the saw in a nose-high position or above shoulder height.

CHAIN CATCHER

The chain catcher is located on the power head just below the chain to further prevent the possibility of a broken chain striking the chainsaw user.

WARNING!

Do not stand in-line with chain when cutting.

www.tanakapowerequipment.com

7

custsvc@tanaka-ism.com

Page 7 Page 9
Page 8
Image 8
Tanaka TCS-3401 manual Chain brake operation Fig, Stopping Fig
Page 7 Page 9

TCS-3401 specifications

The Tanaka TCS-3401 is a powerful and versatile tool in the world of outdoor power equipment. Designed for both residential and commercial use, this 34cc straight shaft trimmer stands out for its reliability, performance, and user-friendly features. The TCS-3401 is ideally suited for all trimming and edging tasks, helping users achieve pristine gardens and landscapes effortlessly.

One of the key features of the Tanaka TCS-3401 is its robust commercial-grade engine. The 34cc two-stroke engine offers an impressive power-to-weight ratio, delivering exceptional performance without compromising maneuverability. This engine is not only powerful but also designed for fuel efficiency, ensuring that users can get more work done on a single tank of fuel. Coupled with a high-performance air filtration system, the engine maintains optimal performance even in dusty conditions, extending its longevity.

Another hallmark of the TCS-3401 is its ergonomic design. The trimmer is equipped with a comfortable handle that reduces vibrations, allowing users to operate it for extended periods without fatigue. The adjustable handle further enhances user comfort, enabling individuals of varying heights to find the perfect operating position. This feature, along with its lightweight construction, makes the Tanaka TCS-3401 one of the most user-friendly trimmers available.

The trimmer also incorporates advanced technologies, such as the easy-start system, which reduces the effort required to start the engine. This ensures that users can get to work quickly without the frustration often associated with starting two-stroke engines. Additionally, the TCS-3401 features a sturdy and durable cutting head, capable of accommodating various attachments like blades and different types of trimmer line, making it adaptable to a wide range of tasks.

Moreover, the TCS-3401 adheres to stringent emission standards, contributing to a cleaner environment. This is especially important for users in urban areas or those who prioritize sustainability in their outdoor maintenance activities.

In sum, the Tanaka TCS-3401 is a well-engineered trimmer that combines power, durability, and comfort. Its advanced features and thoughtful design cater to the needs of both casual users and landscaping professionals, making it a reliable choice for anyone looking to maintain their outdoor spaces efficiently. Whether tackling tall grass, weeds, or creating defined edges along pathways, the TCS-3401 proves to be an invaluable tool for achieving impressive results.
Top Page Image Contents