![](/images/new-backgrounds/1259005/25900523x1.webp)
Owner’s Manual | |
|
|
Maintenance schedule
Below you will find some general maintenance instructions. For further information, please contact your servicing dealer.
Daily maintenance
•Clean the exterior of the unit.
•Check that the drilling attachment is properly centered, sharp, and without cracks. An
•Check that the drilling attachment is sufficiently tightened.
•Check that nuts and screws are sufficiently tightened.
Weekly maintenance
•Check the starter, especially cord and return spring.
•Clean the exterior of the spark plug,
•Remove it and check the electrode gap. Adjust it to 0.6 mm (.024’), or change the spark plug.
•Clean the cooling fins on the cylinder and check that the air intake at the starter is not clogged.
•Check that the gear case is filled with grease up to 3/4.
•Clean the air filter.
Monthly maintenance
•Rinse the fuel tank with gasoline.
•Clean the exterior of the carburetor and the space around it.
•Clean the fan and the space around it.
11 |