TANDBERG 1500 MXP
18
3.2 Using the Remote Control The system is controlled with a remote control. Think of the remote control as a mobile phone
with number keys and call keys. Use the arrow keys and OK to navigate the menu. The
system’s most commonly used functions are also accessible directly from the remote control.
The Infra Red (IR) sensor for the remote control is located in front of the WAVE II Camera.
There is also a second IR-sensor located in the front of the Codec itself, which will be
automatically enabled if the WAVE II Camera is not connected.
1. Mic Off turns your microphone on
and off. (See chapter 3.2.4 Mic off)
2. Arrow keys are used for navigation
in the menu and for moving the
camera when the menu is hidden.
(See chapter 3.2.1 Navigation)
3. Volume + and – adjusts the system
volume. (See chapter 3.2.5 Volume
+ and -)
4. The Layout key toggles between full
screen and different display layouts.
(See chapter 3.2.3 Layout)
5. Cancel takes you back one step in
the menu system. Use Cancel to
delete characters in an input field.
(See chapter 3.2.1 Navigation)
6. Press the Call key to place a call.
(See chapter 3.5 Make a Call)
7. Camera presets define specific
camera positions. Press and hold a
number key for 1 second to save the
current camera position to that
number key. To activate a preset
whilst in a call, simply press and
release that number key. (See
chapter 3.10.3 Camera Presets)
8. Snapshot takes a snapshot of your
video. (Only while you are in a call)
(See chapter 3.11.6 Take New
Snapshot)
9. The Presentation key switches to a
predefined presentation source.
(See chapter 3.11.1 Presentation
Key)
10. Press OK/Menu to show the menu
and to select menu items. (See
chapter 3.2.1 Navigation)
11. Use Zoom + and – to zoom the
camera in and out. (See chapter
3.10.1 Zoom)
12. Selfview displays your outgoing
video. Press Selfview again to turn
selfview off. (See chapter 3.2.2
Selfview