Table of contents |
|
General information | 1 |
About the Multipoint Control Unit (MCU) | 1 |
Package contents | 1 |
Port and LED location | 1 |
LED behavior | 2 |
Connecting the MCU | 4 |
Before you start | 4 |
Step one: Connect power | 4 |
Step two: Connect to Ethernet Port A | 4 |
Initial configuration | 5 |
Step one: Connect to the console port | 5 |
Step two: Configure Ethernet Port A settings | 5 |
Step three: Assign an IP address to the MCU (optional) | 6 |
Step four: Discover the IP address of the MCU | 6 |
Configuring the MCU | 7 |
Step one: Log in to the MCU | 7 |
Step two: Using an H.323 gatekeeper or SIP registrar (optional) | 7 |
Step three: Add endpoints (optional) | 8 |
Using the MCU | 9 |
Creating conferences | 9 |
Calling participants in to a conference | 10 |
Calling in to a conference | 10 |
Streaming conferences | 11 |
Instructing conference participants | 12 |
Checking for updates | 12 |
Troubleshooting and technical support information | 13 |
Using the event log to help solve a problem | 13 |
Getting more help | 13 |
Technical specifications | 14 |
14 |
