Advanced use | TANDBERG Videoconferencing System |
If ‘Far End Loop’ is set to ‘RequestRemote’ while in a call and the call is subsequently disconnected, ‘Far End Loop’ will be set to ‘Off’.
System Selftest
The system performs a check to determine internal hardware integrity. Test Network is useful when you want to check if your network connection is active.
View Current Settings
This window will display all the system settings. Use the arrow key on the remote control to scroll through the list.
Restore defaults
You may restore all system settings to the factory default using this function.
NOTE
THIS DEFAULT SETTING WILL NOT AFFECT YOUR CALL DIRECTORY INFORMATION, NETWORK TYPE, LINE SETUP NUMBERS OR YOUR SPID NUMBERS
IP Address Conflict Check
The codec will give a warning if there is an IP conflict. This check may be initiated by the user by selecting IP Address Conflict Check.
100
