TANDBERG 6000 user manual Call status, Test subsystem

TANDBERG Videoconferencing System Advanced use

Call status

Comprehensive information about the call is available through the Call Status window. The menu has two columns, one for transmitted and one for received audio/video/data information. If Duo Video or MultiSite is used, pressing the LEFT/RIGHT keys will show one page per connected site. Some of the information fields will vary dependent on if H.320 (ISDN calls) or H.323(IP calls) are made.

Test subsystem

You can test the different subsystems of your videoconferencing equipment.

Far End Loop (ISDN only)

SetLocal: This system will loop all incoming audio and video. · The far end will see its own video and hear its own audio.

· The local side will see and hear the far end.

An on-screen indicator will indicate ‘Local Loop’.

RequestRemote: A request will be sent to set the far end in loop. · The far end will see and hear the local side (varies depending on

implementation of loop functionality).

·The local side will see its own video and hear its own audio (if the far end supports loop).

99