TANDBERG D13192 manual Disable Services, Security Alert

Technical Description of TANDBERG Gateway with software version G2

It is also important to understand that only the password is protected with this service. The actual connection is not encrypted, and can be sniffed as for a normal telnet connection.

4.6.5.3Disable Services

There is no router inside the system that can route between the ISDN side and the IP side of the TANDBERG Gateway. This means it is not possible to get access to the Ethernet port via an ISDN conference. However, if wanted the following services may be disabled/enabled (with API commands):

•Telnet Service

•Telnet Challenge Service

•HTTP Service

•HTTPS Service

•FTP Service

•SNMP Service (may also be set to read only or Traps Only)

4.6.5.4 Security Alert

The system will notify any management application when someone tries remote access over IP with illegal password (via SNMP traps). Information about the intruder’s IP-address and the service used (Web, Telnet and FTP) will be given.

When the (optional) TANDBERG Management Suite (TMS) is used, an email notification may also be sent e.g. to the administrator of the network.

D13192 Rev. 02 29