TANDBERG Border Controller User Manual
11 Command Reference
This chapter lists the basic usage of each command. The commands also support more advanced usage, which is outside the scope of this document.
11.1Status
The status root command, xstatus, returns status information from the Border Controller.
To list all status information, type:
xstatus
Status is reported hierarchically beneath the status root. It is possible to reduce the amount of information returned by xstatus by specifying a more detailed status command. To list all xstatus commands available at the root level type:
xstatus ?
11.1.1 calls
xstatus Calls xstatus Calls Call n
Returns a list of active calls on the system or information about a specific call.
11.1.2 ethernet
xstatus Ethernet
xstatus Ethernet MacAddress xstatus Ethernet Speed
Reports the currently active configuration of the Ethernet interface.
MacAddress | The MAC address of the LAN 1 interface. |
Speed | The speed of the Ethernet link. Reports Down if the link is |
| down or not connected. |
43
