TANDBERG Compass, Utility

2 Installation

3. System Name / International System Name

Enter a name in the System Name field using the number keys on the remote control,

in the same way as with a mobile or cellular phone. Hold down the # key for one

second to switch back and forth from numbers to alpha characters. The International

System Name field is only visible if the System Name contains supported Asian and

non-Latin text input.

4. Auto Answer, Phone Book Settings, External Services Settings and

Permissions

Utility MXP requires Auto Answer to be activated, it is also recommended for

Compass MXP. Otherwise these settings may be left unchanged if no special needs

are required. See chapter General Settings for more information.

5. Screen Settings

The settings may be left unchanged if no special needs are required. The display

layout may be changed at any time using the Layout button on the remote control.

6. Software Options

To activate options for the system, a new option key must be entered in the Software

Options menu (see paperwork accompanying the system). The Presenter option key

should be entered under “New Option Key”. Any bandwidth option key should be

entered under “New Bandwidth Key”. For more information on these options, please

contact your TANDBERG representative.

7. Date and Time Settings

Select your preferred Date and Time Settings.

8. Save changes

Remember to save any changes made in a menu by selecting the Save button on the

menu line and pressing OK.

Network configuration:

1. Open the Network menu

Press OK/Menu to open the Main Menu, if not already displayed. Select Control

Panel - Administrator Settings - Network to open the Network menu.

Figure 2-3. Network settings menu.