TANDBERG Compass, Utility

TANDBERG COMPASS MXP / UTILITY MXP

2. ISDN configuration

Set the Network type to the desired network. Specify the settings for the selected

network in the relevant menu. For details, follow the instructions in ISDN-BRI

Settings.

3. LAN configuration

Select LAN Settings in the Network menu and specify the necessary LAN settings

according to the instructions from your LAN administrator. For details, follow the

instructions in LAN Settings. If there is an H.323 Gatekeeper present on your LAN,

refer to H.323 Settings as well.

4. Network Profiles

Please refer to Network Profiles for details

5. Data Port

Not available on this product.

6. Save changes

Remember to save any changes made in the menu by selecting the Save button on

the Menu line and pressing OK.

Kiosk Mode Settings:

Press OK/Menu to open the Main Menu, if not already displayed. Select Control Panel -

Administrator Settings – Menu Settings – Kiosk mode Settings to open the Kiosk Mode

Settings menu.

The default Kiosk Mode settings for the Utility MXP are:

- Language menu OFF

- Available languages check boxes with all languages*

- Auto dial ON

- Allow use of Remote Control YES

- Phone Book Local

- Kiosk menu OFF

After having configured the settings of the Utility MXP, you must activate Kiosk mode

by setting Kiosk Mode til ON. Be avare that you cannot deactivate kiosk mode again

through the menu, but only through the web interface, telent or the remote control.

The default Kiosk Mode settings for the Compass MXP are:

- Language menu OFF

- Available languages check boxes with all languages*

- Auto dial ON

- Allow use of Remote Control NO

- Phone Book Local

- Kiosk menu ON

After having configured the settings of the Compass MXP, you must activate Kiosk

mode by setting Kiosk Mode til ON. Be avare that you cannot deactivate kiosk mode

again through the menu, but only through the web interface, telent or the remote

control.

See Kiosk Mode Settings for more details.