TANDBERG Compass, Utility

TANDBERG COMPASS MXP / UTILITY MXP

Note that the following menu settings do not apply for all TANDBERG MXP systems. Please

refer to the actual menu page on your system.

VGA Monitor Format

To fully leverage your wide screen display, activate the Native 16:9 format by setting the VGA

Monitor Format to Wide. Note that you should only change this setting if your VGA monitor is a

wide screen (16:9) monitor or projector. The VGA and DVI output will then be optimized for Wide

Screen VGA display.

Normal Output format is optimized for Normal VGA monitors (4:3)

Wide Output format is optimized for Wide VGA monitors (16:9)

Figure 4-7. Wide screen VGA or TV monitor in Normal (stretched) mode.

Figure 4-8. Wide screen VGA or TV monitor In Wide (native) mode.

VGA Out Quality*

The supported range of VGA formats will be optimized for the VGA display monitor based on the

source image.

VGA Out Quality enables the user to change the preferred format for the DVI/VGA output. It is

recommended to keep this setting in Auto unless your screen doesn’t support some of the XGA

or SVGA formats the system is using. Note that the VGA Out port support VESA Power

Management.