Tandy 120-2157 manual

AM/FM/CD Weather Band Car Stereo		Faxback Doc. # 58422
(120-2157)	Installation

Before you Begin the Installation

Before you install your stereo, read all the instructions in this owner's manual. You should be able to answer all of these questions about your vehicle's electrical and sound system.

Which terminal in my vehicle's fuse box supplies power even when the ignition is turned off?

Which terminal in my vehicle's fuse box is for accessories?

How do I connect a wire to the fuse box?

Also, be aware that installation in your vehicle might require cutting or modifying your vehicle.

Place the stereo as close as possible to the selected mounting location. We recommend that you install the stereo by temporarily connection it to ground and power, optional components, and your speakers. Then test the connections, disconnect the stereo, mount it in your vehicle, and reconnect it. The instructions in this manual are arranged in this order.

Preparing the Mounting Area

Before you mount the stereo, make sure you have all the necessary materials. Then confirm that the stereo fits your vehicle's mounting area. This auto sound stereo system is a DIN-E size stereo that requires a

2-1/16 inch high by 7-1/8 inch wide by 5-15/16 inch deep (52 x 181 x 152 mm) mounting area.

Note: If the mounting area is too large, you might be able to mount the stereo with an in-dash installation kit, available at your local RadioShack store. Follow the installation kit's instructions to mount the stereo.

CAUTIONS: Make sure the stereo will not tilt up more than 30 degrees when it is mounted.

Be sure to avoid obstructions behind the mounting surface.

Routing Speaker Wires