Tannoy 600A user manual System, Electronic section

TECHNICAL SPECIFICATIONS

System

Frequency response (± 3 dB)	Free space	44 Hz - 20 kHz
Maximum SPL (peak @ 1 m)		107 dB SPL
Maximum SPL at mix position (one pair driven)		117 dB SPL
Distortion		< 0.5%
Dispersion (@ -6dB)		90° conical
Electronic section
Input		10 kΩ balanced on combined XLR/jack
connector
Sensitivity		Adjustable, +4 dBu or -10 dBu
Crossover frequency		1600 Hz
Amplifier output power LF channel (6 Ohms load)		70 W rms
HF channel (6 Ohms load)		70 W rms
Output noise (HF channel, 20Hz - 20 kHz unweighted)		-80 dBV

User controls and indicators

Input level, LF contour, HF contour (switches)

Power ON/OFF switch, Power ON LED, mains voltage selector.

Supply	Self-contained PSU with detachable mains power cord
	Mains voltage adjustable to 220-240V or 110-120V
	Fuse T1A/250V (220-240V range) or T2A/250V (110-120V range)
	Power consumption	10 to 220 VA

Cabinet

Drive unit	6.5 “Tannoy Dual Concentric type 1678
Low frequency design	Bass-reflex load using flared port tubes, in 13 litres
Cabinet construction	MDF (36 mm) front and back panels,
	19 mm high density particle board.
	Two panels fitted with magnetic shielding plates.
Cabinet finish	Front Baffle – Tannoy Dark Blue
	Sides – Hide Grey
Cabinet dimensions (HxWxD)	220 mm x 360 mm x 290 mm
Cabinet weight	9.5 kg
Shipping dimensions (HxWxD)	450 mm x 695 mm x 300 mm
Shipping weight	21 kg

Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.