USING POLE MOUNT ADAPTOR WITH OPTIONAL K-BALLTMBRACKET

T H E

1.Pass the speaker wire through the pole-mount adaptor plate then fix the pole mount bracket adaptor to the pole using the strapping provided. The bracket can be mounted portrait or landscape orientations.

2.Connect the speaker

wires to the connector block in the rear of the K-BallTMbracket.

For connection to an amplifier use pins 1 (+) and 2 (-).

Pins 3 (-) and 4 (+) are in parallel for connection to additional speakers in a distributed line.

3.Offer the K-BallTM

bracket up to the adaptor plate, with the foam gasket** squeezed in between.

Use the supplied fixings to fix the K-BallTMbracket to the pole bracket adaptor.

4.Fix the pole mount bracket adaptor to the pole using the strapping provided. The bracket can be mounted in portrait or landscape orientations.

RANGE USER MANUAL

TRANSFORMER MODELS ONLY

5.Remove the rubber grommet from the rear of the speaker then offer the speaker up to the K-BallTMBracket.

TRANSFORMER

MODELS ONLY

9.The Di5t and Di5 DCt models are fitted with 30W transformers.

THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOW IMPEDANCE.

6.Finger-tighten the

bracket bolt to extend the bracket out to connect with the euro plug socket. Position speaker then use a 19mm wrench to give another 21/2 turns to ensure the speaker is locked in position.

TRANSFORMER

MODELS ONLY

10.The Di6t, Di6 DCt, & Di8 DCt models are fitted with 60W transformers.

THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE IT IS SET FOR LOW IMPEDANCE.

7.Connect a secondary support line to the safety tab at the rear of the cabinet.

8.Lift the grille trim using the tab to access the rotary transformer tapping switch. The rotary switch is found on the top of the Di5 models, and on the bottom of the Di6 and Di8 models.

NOTE

**The foam gasket is intended to provide a water tight seal.

Inclusion of the foam gasket is only a requirement if installing outdoors.

9

Page 8 Page 10
Page 9
Image 9
Tannoy DI6T, DI5T, DI8 DCT, DI6 DCT, DI5 DCT user manual Using Pole Mount Adaptor with Optional K-BALLTMBRACKET
Page 8 Page 10

DI6 DC, DI6, DI5T, DI5 DCT, DI6T specifications

The Tannoy DI5 is a sought-after loudspeaker that is part of Tannoy's DCT (Dual Concentric Technology) lineup, showcasing the brand's commitment to excellence in sound reproduction. Designed for both professional and home audio environments, the DI5 boasts a sleek design that complements modern aesthetics while delivering powerful audio performance.

One of the standout features of the Tannoy DI5 is its unique dual concentric driver configuration. This technology allows the high-frequency driver to be mounted at the center of the low-frequency driver. This alignment ensures that sound from different frequencies emanates from the same point, resulting in superior phase coherence and a wide soundstage. As a result, listeners experience an immersive audio experience with accurate imaging and clarity across the frequency spectrum.

The DI5 is equipped with a high-quality 5-inch woofer that produces a rich and detailed low-end response, while the 1-inch titanium dome tweeter delivers crisp and transparent high frequencies. Together, these elements create a balanced audio profile suitable for various applications, from music listening to studio monitoring. The speaker's frequency response spans from 60 Hz to 20 kHz, providing a full-range sound that captures both subtle nuances and powerful dynamics.

In terms of build quality, the Tannoy DI5 is constructed with durable materials that enhance its performance and longevity. The cabinet is designed to minimize resonance, which can color the sound. Additionally, the speaker features a front-firing bass port that allows for flexibility in placement, making it easier to position the DI5 in different environments while maintaining optimal performance.

Connectivity is another strong suit of the DI5, which includes a variety of input options to accommodate different technologies and devices. Whether connecting to a home audio system, workstation, or professional studio setup, users will find it easy to integrate the DI5 into their existing setups.

Overall, the Tannoy DI5 combines advanced technologies, thoughtful engineering, and high-quality components to deliver an exceptional listening experience. Whether for casual music enjoyment or critical studio work, the DI5 stands out for its ability to reproduce sound with accuracy and clarity, making it a valuable addition to any audio enthusiast's collection.
Top Page Image Contents