Tannoy iw62 TDC warranty Architectural specifications

iw62 TDC

Architectural specifications

The in wall speaker shall consist of one 165mm (6.50") Dual Concentric™ full range transducer, one 25mm (1.00”) SuperTweeter™ and one 165mm (6.50") bass driver, mounted in an injection moulded front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The three-way system shall incorporate an optimised low loss crossover network. The wiring terminals shall be gold plated spring loaded connectors.

Performance of the in-wall speaker shall meet or exceed the following criteria: The system shall have a coverage angle of 120 degrees (1kHz to 6kHz). Frequency response measured on axis shall be 34Hz - 54kHz (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 92dB (1W @ 1m). Long term power handling capacity as defined in EIA-426B test shall be 105W, recommended amplifier power 220W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.

In 70V or 100V distributed audio systems the iw62 TDC can be used with the optional the THP60 high performance, low insertion loss transformer with 60, 30, 15 and 7.5W taps* available. A weather resistant perforated steel grille covers the transducer. Both the grille and baffle shall be paintable.

The system shall not exceed the following dimensions: 473.50 x 227 or 18.64 x 8.94 (H x W). Hole cut out size shall be 426.10 x 187.6mm or 16.76 x 7.39"

The in wall speaker system shall be the.....iw62 TDC.

*70.7 Volt only

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T:00 44 (0) 1236 420199

T:00 1 (519) 745 1158

T:00 49 (180) 1111 881

T:00 33 (0)1 7036 7473

E:enquiries@tannoy.com

E:inquiries@tannoyna.com

E:anfragen@tannoy.com

E:ventes@tannoy.com

Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08