iw62 TDC
TECHNICAL SPECIFICATIONS
|
|
|
|
|
System | iw62 TDC |
|
|
|
Frequency Response | 70Hz - 51kHz |
|
|
|
Frequency Range | 34Hz - 54kHz |
|
|
|
System Sensitivity (1W @1m) (2) | 92dB (1W - 2.83V for 8 Ohms) |
| ||
Nominal Coverage Angle | 90 degrees conical |
| ||
Coverage Angle (1kHz to 6kHz) | 120 degrees conical |
| ||
Directivity Factor (Q) | 4.6 averaged 1kHz to 6kHz |
| ||
Directivity Index (DI) | 6.0 averaged 1kHz to 6kHz |
| ||
Rated Maximum SPL (3) | 112dB |
|
|
|
Average |
|
|
| |
Average | 110dB (with optional THP60 transformer) | |||
Peak | 118dB |
|
|
|
Power Handling | 105W |
|
|
|
Average |
|
|
| |
Programmed | 210W |
|
|
|
Peak | 420W |
|
|
|
Recommended Amplifier Power 210W @ 8 Ohms |
|
|
| |
Nominal Impedance | 8 Ohms |
|
|
|
Distortion | 2nd Harmonic | 3rd Harmonic | ||
10% Full Power (5.5V) | ||||
250Hz | 0.64% | 0.06% |
|
|
1kHz | 0.6% | 0.52% |
|
|
10kHz | 0.69% | 0.06% |
|
|
1% Full Power (1.73V) | 2nd Harmonic | 3rd Harmonic | ||
250Hz | 0.18% | 0.11% |
|
|
1kHz | 0.08% | 0.23% |
|
|
10kHz | 0.27% | 0.17% |
|
|
Crossover | Passive, 750Hz, 1.8Hz, 16Hz |
| ||
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
|
|
|
|
|
|
|
| Transducers |
|
|
|
| Dual Concentric™ | Point source constant directivity drive unit |
| ||
| Low Frequency | 1 x 165mm (6.50”) with multi fibre paper pulp cone | |||
| High Frequency | 19mm (0.75”) titanium dome with neodymium | |||
| Supertweeter™ | magnet system | |||
| 19mm (0.75”) titanium dome with neodymium |
| |||
| Low Frequency | magnet system | |||
| 1 x 165mm (6.50”) additional bass driver |
| |||
|
|
|
|
| |
| Physical |
|
|
| |
| Enclosure | Baffle | UL |
| |
| Optional accessory: | Grille | Steel, with weather resistant coating | ||
| Back can | Zinc plated steel | |||
| Clamping Design | Eight way self aligning security toggle clamp system |
| ||
| Connectors | Gold plated connectors with spring terminals |
| ||
| Hole Cutout Size | 426.10 x 187.6 (16.76 x 7.39”) |
| ||
| Dimensions | Maximum wall thickness - 25mm (1.00”) | |||
| 473.5mm x 227mm (18.64” x 8.94”) (H x W) | ||||
| Front Baffle | ||||
| Front of wall to rear | 99mm (3.90”) | |||
| of magnet assembly |
|
|
| |
| Net Weight | 5kg (11lbs) |
| ||
| Included Accessories Painted mask, cutout template, grille |
| |||
| Optional Accessories Steel back can |
| |||
|
|
| Steel back can with THP60 transformer | ||
|
|
| Plaster (mud) ring | ||
| Transformer Taps (optional) |
|
| ||
| 70V | 60W / 30W / 15W / 7.5W / OFF & Low Impedence operation | |||
| 100V | 60W / 30W / 15W / OFF & Low Impedence operation |
| ||
Ordering Information
|
|
|
|
|
|
|
|
|
|
|
|
| PART NUMBER | MODEL NAME | COLOUR | PACKED QUANTITY |
|
|
|
|
|
|
|
|
| ||||
|
|
| 8000 3770 | iw62 TDC | White | 1 |
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T:00 44 (0) 1236 420199
T:00 1 (519) 745 1158
T:00 49 (180) 1111 881
T:00 33 (0)1 7036 7473
E:enquiries@tannoy.com
E:inquiries@tannoyna.com
E:anfragen@tannoy.com
E:ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change | iW62TDC data file issue:1.06 // 15.01.08 |
