1.Use the number pads to set a cooking time. You can set a cooking time from one seconds to 99 minutes and 99 seconds. If you are setting a time greater than one minute, you must enter numbers for both minutes and seconds. For example, to set 20 minutes, enter 2,0,0,0.
2.If you want to set a power level other than 100% power, touch POWER, then use the number pads to enter the power level. You can set the power level from 1 to 9.
3.Touch START/STOP to start cooking.
USE THESE SINGLE DIGIT TO REPRESENT POWER LEVELS
Number pad | % of Power |
9 | 90% |
8 | 80% |
7 | 70% |
6 | 60% |
5 | 50% |
4 | 40% |
3 | 30% |
2 | 20% |
110%
B.
Some recipes require different stages of cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in
DO NOT TOUCH START/STOP PAD.
2. SET STAGE 2:
Touch COOK pad then enter proper cooking time and (lower) power level. (Most
3. Touch START/STOP pad.
NOTE:
After total time has elapsed, 4 beeps sound and END appears in display. Touch RESET pad or open oven door to clear END before starting another cooking function.
SETTING “SPEED DEFROST”
1.Touch SPEED DEFROST pad.
2.Enter desired defrosting time by touching correct number pads. Digital timer sets minutes and seconds from left to right so a single digit can be set (5 for 5 seconds ) or up to 4 digits (2405 for 24 minutes 5 seconds).
3.Touch START/STOP pad.
NOTE:
·After time has elapsed four beeps sound and END appears in display. Touch RESET pad or open door to clear END before starting another cooking function.
·After setting SPEED DEFROST, oven can be programmed to automatically switch to one or
A. For speed defrost and one stage cooking, follow steps above. Before touching START/STOP pad, touch COOK pad, enter time and power level. Then touch START/STOP pad.
B. For speed defrost and two stage cooking, follow steps above. Before touching START/STOP pad, enter
10
