Wireless-B Internet Video Camera
Internet
The Internet screen shows the Camera found on the Internet, along with the status information for it. See Figure
Test Results
First, go to the Camera Info section. Enter the Camera’s Address, Port Number, and login information (if required). Then click the Test button to find the Camera. The following information will be displayed:
Camera Info
Camera Name. The name you gave to the Camera.
Description. The information about the Camera that you entered.
Address. The Camera’s IP address or SoloLink DDNS address.
Port Number. The port number the Camera uses for communication.
Login. If you set up the Camera with a name and password, then you will need to enter them here in order to access the Camera.
Name. Enter the login Name.
Password. Enter the login Password.
To add the Camera to the Utility’s list, click the Add button. If you wish to clear a Camera, click the Clear button.
Change Settings
To modify a Camera’s settings, select its name in the Camera List box, and click the Change Settings button. See Figure
Test Results
First, make your changes to the Camera’s Address and Port Number fields as needed. If you set up the Camera with a name and password, then you will need to enter them in the Name and Password fields in order to access the Camera. Click the Save button to save your changes.
Click the Test button to make sure the Utility is able to find the Camera using the new information.
Chapter 6: Installing and Using the
Figure 6-10: Find Camera from Internet
Figure 6-11: Change Settings
21
Using the Viewer & Recorder Utility
