Wireless-B Internet Video Camera
20.Set up port forwarding on your network router, so the SoloLink DDNS Service will be able to track the
For other routers, refer to your router’s documentation.
The SoloLink DDNS setup is complete. If you want to register more Cameras with your SoloLink account,
proceed to the “SoloLink Registration of Additional Cameras” section.
For more information about the Camera’s
SoloLink Registration of Additional Cameras
After you have set up your SoloLink account, you can add more Cameras to your SoloLink account using each Camera’s
1.To access a Camera’s
2.The Welcome screen will appear (see Figure
3.A password request page, shown in Figure
4.Click the SoloLink DDNS tab.
5.In the Username, Password, and Your Domain fields, enter your SoloLink account information (see Figure 7- 24).
6.In the Device Name field, give the Camera a unique name. The DDNS service will not work if multiple Cameras have the same Device Name.
7.In the WAN Port field, enter a unique port number. This is the number of the port you will use to access the Camera remotely. If you need to find an available port, click Find Available Port and follow the
8.Depending on how often you want the DDNS service to update the dynamic IP address, select the appropriate time interval from the DDNS Service Update
Chapter 7: Setting up the Linksys SoloLink™ DDNS Service
Figure 7-21: Port Forwarding Information
Figure 7-22: Web-based Utility Welcome
Figure 7-23: User Name and Password
38
SoloLink Registration of Additional Cameras
