Linksys WVC11B manual Security Settings

Wireless-B Internet Video Camera

11.The Security Settings screen will appear. If your network has WEP encryption enabled, then select the level of WEP encryption and enter a Passphrase. If you do not have a Passphrase and you want to manually enter a WEP key, leave the Passphrase field blank. If your network doesn’t have WEP encryption disabled, keep the default, Disabled.

•WEP. In enable WEP encryption, select 64-Bit Keys or 128-Bit Keys from the drop-down menu. Then enter a Passphrase. If you want to manually enter a WEP key, leave the Passphrase field blank.

•Passphrase. If you enabled WEP encryption, you can enter a Passphrase, so a WEP key will be automatically generated after you click the Next button. If you want to manually enter a WEP key, leave the Passphrase field blank. The Passphrase is case-sensitive and should have 16 alphanumeric characters or fewer. It must match the passphrase of your wireless network and is compatible with Linksys wireless products only. (You will have to enter the WEP key(s) manually on any non-Linksys wireless products.)

Click the Next button.

12.If you entered a Passphrase, then you will see the automatically generated WEP key. If you did not enter a Passphrase, then enter a WEP key in the Key 1 field.

•Key 1. If you need to manually enter a WEP key, complete this field. If you are using 64-bit WEP encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit WEP encryption, then the key must consist of 26 hexadecimal characters. Valid hexadecimal characters are “0” through “9” and “A” through “F”.

Click the Next button.

Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera

Figure 5-10: Security Settings

Figure 5-11: Security Settings (WEP Key)

14

Setup Wizard