Linksys WVC11B manual SoloLink Ddns

Wireless-B Internet Video Camera

SoloLink DDNS

The SoloLink DDNS screen allows you to set up and configure your SoloLink DDNS Service. DDNS (Dynamic Domain Name System) lets you assign a fixed host and domain name to a dynamic Internet IP address. If you have already set up your SoloLink account, then you can use this screen to register additional Cameras. For instructions, go to the “SoloLink Registration of Additional Cameras” section on the following page.

Note: If you use the Camera’s DDNS feature, then you must also configure the port forwarding feature on your network router. Go to www.linksys.com/portfwd for instructions on how to configure a Linksys router. For other routers, refer to your router’s documentation.

SoloLink DDNS

Username. Enter the username you have set up on your SoloLink account. If you are a new user, click New User?

-Click here to Register. The New User Registration screen will appear, as shown in Figure 8-12. Click the Continue button, or click the Back screen to return to the previous screen. Your web browser will automatically start up, and you will visit a website to set up your SoloLink account. Follow the on-screen instructions. For more information, refer to “Chapter 7: Setting up the Linksys SoloLink DDNS Service,” which will guide you through setup of your SoloLink account.

Password. Enter the password you have set up on your SoloLink account. If you have forgotten your password, click Forgot your Password?

The Password Request screen will appear, as shown in Figure 8-13. Complete the Domain name field. Click the Request Password button to request your username and password, which will be e-mailed to the e-mail address registered with your SoloLink DDNS account. Click the Cancel button to cancel your change. Click the Back button to return to the previous screen.

Your Domain. Enter the host and domain name you have set up on your SoloLink account. It should be in this format: <Location ID>.ourlinksys.com. For example, if myhouse is the Location ID, then the host and domain name would be myhouse.ourlinksys.com.

Device Name. Enter the name you have given the Camera.

WAN Port. Enter the number of the port you will use to remotely access the Camera. If you need to find an available port, click Find Available Port and follow the on-screen instructions.

DDNS Service Update. Depending on how often you want the DDNS service to update the dynamic IP address, select the appropriate time interval from the drop-down menu. To update the dynamic IP address immediately, click the Update Now button.

Chapter 8: Using The Wireless-B Internet Video Camera’s Web-based Utility

Figure 8-11: SoloLink DDNS

Figure 8-12: New User Registration

47

Setup