Wireless-B Internet Video Camera

3.Plug the power adapter into an electrical outlet.

The Camera’s Ready LED flashes while the Camera is initializing. The Camera is ready for use when the Ready and Wireless LEDs are solidly lit.

Proceed to “Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera.”

Moving the Camera to a Different Network

When you move the Camera from a wired network to a wireless network, or vice versa, you must power off the

Camera before connecting to the new network. Proceed to the appropriate instructions.

To move the Camera from a wired network to a wireless network, follow these instructions:

1.Unplug the power adapter from the Camera.

2.Unplug the Ethernet network cable from the Camera.

3.Re-connect the power adapter to the Power port on the Camera.

The Camera’s Ready LED flashes while the Camera is initializing. The Camera is ready for use when the Ready and Wireless LEDs are solidly lit.

Proceed to “Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera.”

To move the Camera from a wireless network to a wired network, follow these instructions:

1.Unplug the power adapter from the Camera.

2.Connect the Ethernet network cable to your PC, router, or switch.

3.Connect the other end of the cable to the LAN port on the Camera.

4.Re-connect the power adapter to the Power port on the Camera.

The Camera’s Ready LED flashes while the Camera is initializing. The Camera is ready for use when the Ready and LAN LEDs are solidly lit.

Proceed to “Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera.”

Chapter 4: Connecting the Wireless-B Internet Video Camera for Setup

9

Moving the Camera to a Different Network

Page 16
Image 16
Linksys WVC11B manual Moving the Camera to a Different Network