Wireless-B Internet Video Camera

Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera

Setup Wizard

The Wireless-B Internet Video Camera Setup Wizard will guide you through the installation and configuration procedure.

1.Insert the Setup CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field provided, enter D:\wvc11b.exe (if “D” is the letter of your CD-ROM drive).

Setup. Click the Setup button to begin the installation process.

Install Viewer & Recorder Utility. Click this button to install the Camera’s Viewer & Recorder Utility on your PC.

Setup SoloLink DDNS Service. Click the Setup SoloLink DDNS Service button to configure and use Linksys’s Dynamic Domain Name System (DDNS) service.

• User Guide. Click this button to open the PDF file of this User Guide.

Figure 5-1: Welcome

• Exit. Click the Exit button to exit the Setup Wizard.

2.To install the Camera, click the Setup button on the Welcome screen.

3.When you see the screen shown in Figure 5-2, make sure the Camera is properly connected to either a wired or wireless network. Then click the Next button to continue.

Figure 5-2: Connection for Setup

Chapter 5: Setting up and Mounting the Wireless-B Internet Video Camera

10

Setup Wizard

Page 17
Image 17
Linksys WVC11B manual Setting up and Mounting the Wireless-B Internet Video Camera, Setup Wizard