Tappan TM7050S Operation Instructions, Timer, NUMBER PADS0-9, Clock, Reset, Start/Stop

Models: TM7050S

1 16
Download 16 pages 48.95 Kb
Page 10
Image 10

Touch to set defrosting time; the oven automatically divides the defrosting time into periods of alternating defrost and stand

times by cycling on and off.

TIMER

You can use the TIMER function independently, even while a cooking program is going on in the oven.

NUMBER PADS(0-9)

Touch to set times or amounts.

CLOCK

Touch to set the clock.

RESET

Clears all previous settings if touched before cooking starts.

START/STOP

Touch to start or stop cooking.

OPERATION INSTRUCTIONS

BEEPS DURING OVEN SETTINGS

ONE BEEP: Oven accepts the entry.

TWO BEEPS: Oven does not accept the entry, check and try again.

SETTING THE CLOCK

1.Touch CLOCK pad.

2.Use the number pads to enter the correct time. You must touch at least three numbers to set the clock(one for hour and two for minutes).

3.Touch CLOCK pad again.

NOTE:

This is a 12 hour clock. When the oven is

first plugged in or when power resumes after a power interruption, the display will

show ENTER CLOCK TIME, if you prefer

to not have the clock displayed, touch RESET pad. You can check the clock time while cooking is in progress by

touching the CLOCK pad.

SETTING THE OVEN TIMER

1.Touch TIMER pad.

2.Enter the amount of time you want to count down by touching the number pads. Digit time is in minutes and seconds and set left to right. Set one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds).

3.Touch START/STOP pad.

NOTE:

·Time countdown can be seen in display for 3 seconds before clock or cooking time is returned to display.

·Touch TIMER and then touch RESET to cancel TIMER during timing process.

SETTING COOKING TIMES AND POWER LEVELS

A. One-stage Cooking

9

Page 10
Image 10
Tappan TM7050S Operation Instructions, Timer, NUMBER PADS0-9, Clock, Reset, Start/Stop, Beeps During Oven Settings