Targus DEFCON 3 Setting Alarm Volume, Setting Alarm Siren, High Volume - 94 dB Default setting

Setting Alarm Volume

Your DEFCON 3 alarm unit has two volume settings:

High Volume - 94 dB (Default setting)

Low Volume - 84 dB

1.Access Program Mode. Alarm volume is the second feature you encounter in Program Mode.

2.To bypass the motion sensitivity feature and program the alarm volume, press and hold the Program button twice.

For this feature, the right LED light is on, and the left LED light

flashes slowly and continuously .

3.Press and hold the Arm/Disarm button to cycle between the two volume settings.

A three-second sample alarm will sound at the volume you chose.

4.Press and hold the Program button to advance to the next programmable feature - alarm siren.

Setting Alarm Siren

Your DEFCON 3 Security System provides a selection of six different alarm siren sounds.

1.Access Program Mode. The alarm siren is the third feature you encounter in Program Mode.

2.To bypass the other features and program the alarm siren sound, press and hold the Program button three times.

For this feature, the right LED light is on, and the left LED light

flashes quickly and continuously .

3.Press and hold the Arm/Disarm button to cycle through the six siren sounds.

A three-second sample siren will sound at the volume you chose for each siren sound as you cycle through them.

4.Make your selection for the alarm siren sound.

5.Press and hold the Program button for one second to advance to Motion Sensitivity Mode, or three seconds to exit Program Mode and lock your selections into memory.

9