![](/images/new-backgrounds/1038984/3898435x1.webp)
5- DJ functions
Press the
Press the IN key for immediate playback from the IN point when it is set (like a HOT CUE key).
Canceling loop points
Cancel the loop (IN and OUT) points with either of the following actions.
Press the
The IN and OUT key lights will turn off when the loop points are canceled.
Changing the OUT point
Press the OUT key during loop playback to change the OUT point and restart loop playback from the IN point. The new OUT point is determined according to the Setup menu OUT KEY setting.
ªHALF
The new OUT point is set to a point halfway between the IN point and the OUT point.
ªSET
The OUT point is set at the location where the OUT key is pressed during playback.
Adjusting the OUT point
Press the OUT key while holding down the SHIFT key to enable use of the JOG dial for editing the OUT point during loop playback. Turn the dial clockwise to lengthen the loop (or counterclockwise to shorten it) during playback until the desired OUT point is
reached. Press the OUT key at the desired moment to set the new OUT point and exit OUT point adjust- ment mode.
The adjustment will affect the loop playback in real time.
Restoring the OUT point
Press the IN key while holding down the SHIFT key during or after adjustment of the OUT point to
restore the OUT point to its
Tempo control
Use the tempo slider to control playback speed. The display shows the current tempo adjustment.
Push the slider in the
Setting the tempo range
Use the TEMPO key to change the tempo slider range. Press the TEMPO key to cycle through the fol- lowing tempo ranges.
±8% (default setting), ±16%, ±32%, ±100%
The new range setting becomes effective after it flashes on the display for a few seconds.
NOTE
When an attached