Table of contents | English |
|
|
1. Before you start | 6 | 4. More advanced operation | 15 | |
1.1 | Environmental conditions | 6 | 4.1 Key control | 15 |
1.2 | Beware of condensation | 6 | 4.2 Scratching | 15 |
1.3 | Handling of discs | 6 | 4.3 Brake | 15 |
2. Functions and Controls | 7 | Set the brake time | 15 | |
2.1 | Main Unit (Front Panel) | 7 | 4.4 FILTER | 15 |
2.2 | Main Unit (Rear Panel) | 7 | 4.5 Track Memory / Recall | 16 |
2.3 | Remote Controller (Top Panel) | 8 | Track memory | 16 |
2.4 | Remote Controller (Bottom Panel) | 10 | Recall | 16 |
2.5 | Remote Controller (LCD) | 10 | 4.6 Fader Start | 17 |
3. Playback operation | 12 | 4.7 Relay Play | 17 | |
3.1 | CUE | 12 | 4.8 Auto Cue | 17 |
To memorize the CUE point | 12 | 4.9 Auto Ready | 17 | |
Stutter play with CUE key | 12 | 4.10 Programmed Play | 18 | |
3.2 | CUE | 12 | Create the program | 18 |
To memorize the CUE | 12 | Edit program | 18 | |
Stutter play with CUE | 12 | Insert program | 18 | |
3.3 | Flash Start | 12 | Delete program | 19 |
3.4 | 13 | 4.11 Preset menu | 19 | |
To store the LOOP points | 13 | 4.12 Backup memory | 20 | |
Disengage the loop | 13 | 5. Specifications | 21 | |
13 | Error Messages | 21 | ||
Erasing the LOOP points | 13 | Demensions | Back page | |
Changing the LOOP end point (B point) .... | 13 |
|
| |
3.5 Adjusting the tempo | 14 |
|
| |
Tempo range | 14 |
|
| |
Using the TEMPO slider | 14 |
|
| |
Using the TAP key | 14 |
|
| |
3.6 | Pitch bending | 14 |
|
|
3.7 | Key original | 14 |
|
|
TASCAM