English

1. Before you start

 

 

1.1 Environmental conditions

The TASCAM CD-X1500 may be used in most areas, but to maintain top performance, and prolong operating life, observe the following environmental conditions:

The nominal temperature should be between 5°C and 35°C (41°F and 95°F).

Relative humidity should be 30 to 90 degrees non- condensing.

Make sure that the drive unit is mounted in a level position for correct operation.

The units should be mounted, using the supplied rack mounting kits. A typical configuration is shown below, but other configurations are possible:

NOTE

…If the disc trays are more than 5 degrees away from the horizontal, they will not open or close.

…Do not install this apparatus in a con- fined space such as a book case or simi- lar unit.

1.2 Beware of condensation

If the player (or a compact disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the player for one or two hours with the power turned on, then turn the power off and on again.

1.3 Handling of discs

The unit has been designed specifically for

reproduction of discs bearing the mark. No other discs can be reproduced.

Observe the following:

•Always place the compact discs in the trays with their label facing upward (compact discs can only be played on one side).

•To remove a disc from its storage case, press down on the center of the case, and lift the disc out, holding it carefully by the edges.

•Finger marks and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records, the compact disc has no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles.

•Wipe in a straight motion from the inside to the outside of the disc. Small dust particles and light stains will have absolutely no effect on reproduc- tion quality.

•Never use such chemicals as record sprays, anti- static sprays or fluid, benzine or thinner to clean compact discs. Such chemicals will do irrepara- ble damage to the disc's plastic surface.

•Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to "skip".

•Don't expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperature can warp the disc.

•Only use circular compact discs. Avoid using non-circular promotional, etc. discs.

•To keep the laser pickups clean, don't touch them. For the same reason, don't leave the disc trays open unnecessarily.

6 TASCAM CD-X1500 DUAL CD PLAYER

Page 5 Page 7
Page 6
Image 6
Tascam CD-X1500 owner manual English Before you start, Environmental conditions, Beware of condensation, Handling of discs
Page 5 Page 7

CD-X1500 specifications

The Tascam CD-X1500 is a professional-grade dual CD player designed for DJs, live performers, and event venues seeking reliable and versatile audio playback solutions. Known for its robust build quality and user-friendly interface, the CD-X1500 has become a staple in the industry.

One of the standout features of the Tascam CD-X1500 is its dual CD mechanism, allowing for seamless transitions between tracks and providing DJs with the ability to mix two audio sources effortlessly. Each player can operate independently, enabling the user to cue one track while another is playing, enhancing performance fluidity. Additionally, the unit supports playback from multiple formats, including standard audio CDs, CD-R, and CD-RW, making it adaptable for various audio needs.

The user interface of the CD-X1500 is designed for efficiency and speed. It features a backlit LCD display that provides clear visibility of track information, including elapsed time and remaining time, even in low-light environments. The device is equipped with standard control features such as play, pause, stop, cue, and pitch control, which allows DJs to manipulate the speed of playback for seamless mixing. The pitch control range is notably broad, allowing adjustments up to ±16%.

Another significant technology integrated into the CD-X1500 is the digital output feature, which ensures high-quality sound by minimizing signal degradation. This makes the CD-X1500 a reliable choice for audio professionals who demand the best sound quality in their performances. The unit also includes a range of connectivity options, including balanced XLR outputs and RCA outputs, facilitating easy integration into various audio setups.

The CD-X1500 is further enhanced with programmable playback features, allowing users to create customized playlists for events and gigs. Additionally, the unit offers a looping function, which is invaluable for DJs looking to create extended mixes or highlight specific segments of tracks.

Durability is a key characteristic of the Tascam CD-X1500. Built to withstand the rigors of touring and live performances, it is designed with a sturdy chassis that can handle the demands of professional use. With its blend of features, advanced technology, and reliability, the Tascam CD-X1500 continues to be a preferred choice for audio professionals and DJs around the world.
Top Page Image Contents