Manuals / Tascam / Musical Instruments & Equipment / Music Mixer

Tascam Digi 001 manual Inputs Outputs

Models: Digi 001

1 12

Page 4

To record in Pro Tools from the DM-24, you must assign your Pro Tools tracks to receive their input from the ADAT connection sent from the DM-24 direct outputs.

INPUTS

OUTPUTS

You must also assign your outputs. This is where you decide what tracks you want to mix in the DM-24, and what tracks you want to mix in Pro Tools. In the example below the Tambourine is sent to analog output 5, the Bass is being sent to analog output 6 and the other tracks are being sent to the Pro Tools stereo buss.

Page 4

Image 4

Contents

HOOK UP Recording and mixing with the DM-24 and DigiWORD CLOCK SETTINGS INPUTS OUTPUTS The stereo buss of the DM-24 is sent to the S/PDIF Digital Output INPUTS OUTPUTS Assign channels 15 and 16 to D IN 1-L and D IN 1-R Assign channels 15-16 to BUSS 1-2 and nothing else Assign EFFECT 1 and 2 to the Stereo bussOn the MONITOR page assign SEL 1 to BUSS Press the SEL 1 key in the Control Room section toAs a device Manuf Mackie Model other Device ID Name HUI DM-24 HUI emulation with Pro ToolsReceives MTC is checked Is Controller is checked Receives on CH Receive from HUI Send to HUI Channels Under SETUPS-PERIPHERALS-MIDI CONTROLLERS #1 TYPE is HUIOn the DM-24 EXTERNAL CONTROL page HUI EMULATE ID 01 MIDI RX checked On the MACHINE CONTROL page HUI EMULATE ID 01 TRA checked and REC The small print