Manuals / Tascam / Musical Instruments & Equipment / Music Mixer

Tascam Digi 001 manual DM-24 HUI emulation with Pro Tools

Models: Digi 001

1 12

Download 12 pages 29.15 Kb

Page 8

DM-24 HUI emulation with Pro Tools

DM-24 HUI emulation with Pro Tools

First, you must have an OMS setup which has MIDI I/O connected between the 001 and the DM-24 (HUI).

As a device:

Manuf: Mackie

Model: other

Device ID: 0

Name HUI

Receives MTC is checked

Is Controller is checked

Receives on CH 1

In Pro Tools Session Startup window MTC to Port is checked and HUI is the chosen port.

Image 8

Tascam Digi 001 manual DM-24 HUI emulation with Pro Tools, As a device Manuf Mackie Model other Device ID Name HUI

Contents

HOOK UP Recording and mixing with the DM-24 and DigiWORD CLOCK SETTINGS INPUTS OUTPUTS The stereo buss of the DM-24 is sent to the S/PDIF Digital Output INPUTS OUTPUTS Assign channels 15 and 16 to D IN 1-L and D IN 1-R Assign channels 15-16 to BUSS 1-2 and nothing else Assign EFFECT 1 and 2 to the Stereo bussOn the MONITOR page assign SEL 1 to BUSS Press the SEL 1 key in the Control Room section toReceives MTC is checked Is Controller is checked Receives on CH DM-24 HUI emulation with Pro ToolsAs a device Manuf Mackie Model other Device ID Name HUI On the DM-24 EXTERNAL CONTROL page HUI EMULATE ID 01 MIDI RX checked Under SETUPS-PERIPHERALS-MIDI CONTROLLERS #1 TYPE is HUIReceive from HUI Send to HUI Channels On the MACHINE CONTROL page HUI EMULATE ID 01 TRA checked and REC The small print