Advanced techniques
TASCAM DP-01 Owner’s Manual 33
Punching
Punch recording
When you have rehearsed your punch-in, you can start recording.
1Press the RHSL key so that the indicator goes out (but the AUTO
PUNCH indicator is still lit).
2Press PLAY so that playback starts. Use the pre-roll time to get ready to
record.
At the punch-in point, the DP-01 goes into rec ord mode (the RECORD
indicator lights).
At the punch-out point, recording stops (the RECORD indicator goes
out), and playback continues until the post-roll point and then returns
to the pre-roll point. The AUTO PUNCH indicator is turned off (the
track arming status stays the same).
If you want to re-record the punch, turn AUTO PUNCH back on before
recording agai n.
Pre-roll and post-roll times
The pre-roll and post-roll times can be set to suit your style of play-
ing.
1Press MENU and scroll down to PREFERENCE and press the key.
The pre-roll and
post-roll times can
be set between 1.0 seconds and
9.9 seconds in 0.1 second steps
2Use the cursor keys to move the cursor to the Pre (pre-roll time) item,
and use the jog wheel to set the value in seconds.
3Use the cursor keys to move down to the Post (post-roll time) item and
use the jog wheel to change the value.
4Press EXIT when you’re done, so that you can start using these settings.
DP-01_OM_E.book 33 ページ ２００５年６月１３日 月曜日 午後７時１４分