2 – Controls And Indicators
12 TASCAM FW-1884 Owner’s Manual
MARKER/F5 – In COMPUTER Control Mode,
this key is normally mapped to the host application’s
Place Marker function. Refer to the Application Notes
for your software for details.
In MON MIX mode, this key has no function.
In MIDI CTL mode, this key sends out specific MIDI
controller commands.
LOOP/F6 – In COMPUTER Control Mode, this
key is normally mapped to the host application’s Acti-
vate/Deactivate Loop (repeat) mode function. Refer to
the Application Notes for your software for details.
In MON MIX mode, this key has no function.
In MIDI CTL mode, this key sends out specific MIDI
controller commands.
CUT – In COMPUTER Control Mode, this key is
normally mapped to the host application’s Cut func-
tion. Refer to the Application Notes for your software
for details.
In MON MIX mode, this key has no function.
In MIDI CTL mode, this key sends out specific MIDI
controller commands.
DEL - In COMPUTER Control Mode, this key is
normally mapped to the host application’s Delete func-
tion. Refer to the Application Notes for your software
for details.
In MON MIX mode, this key has no function.
In MIDI CTL mode, this key sends out specific MIDI
controller commands.
COPY – In COMPUTER Control Mode, this key is
normally mapped to the host application’s Copy func-
tion. Refer to the Application Notes for your software
for details.
In MON MIX mode, this key has no function.
In MIDI CTL mode, this key sends out specific MIDI
controller commands.
PASTE – In COMPUTER Control Mode, this key is
normally mapped to the host application’s Paste func-
tion. Refer to the Application Notes for your software
for details.
In MON MIX mode, this key has no function.
In MIDI CTL mode, this key sends out specific MIDI
controller commands.
ALT/CMD – This is a modifier key. When held, it
modifies the behavior of other selected keys. Its behav-
ior is entirely dependent on the host application sup-
port; in some cases it will replicate the behavior of the
associated key on your computer keyboard, while in
others it may modify the FW-1884’s surface controls.
Refer to the Application Notes for your software for
details.
This key always sends messages to the host computer,
regardless of which control mode is selected for the rest
of the control surface.
UNDO – In COMPUTER Control Mode, this key is
normally mapped to the host application’s Undo func-
tion. Refer to the Application Notes for your software
for details.
In MON MIX mode, this key has no function.
In MIDI CTL mode, this key sends out specific MIDI
controller commands.
SHIFT – This is a modifier key. When held, it modi-
fies the behavior of other selected keys. Its behavior is
entirely dependent on the host application support; in
some cases it will replicate the behavior of the SHIFT
key on your computer keyboard, while in others it may
address the FW-1884’s surface controls. Refer to the
Application Notes for your software for details.
This key always sends messages to the host computer,
regardless of which control mode is selected for the rest
of the control surface.
In MON MIX mode, holding SHIFT and pressing
CLR SOLO clears all mutes.
CTRL – This is a modifier key. When held, it modifies
the behavior of other selected keys. Its behavior is
entirely dependent on the host application support; in
some cases it will replicate the behavior of the CON-
TROL key on your computer keyboard, while in others
it may address the FW-1884’s surface controls. Refer to
the Application Notes for your software for details.
This key always sends messages to the host computer,
regardless of which control mode is selected for the rest
of the control surface.