2 – Part names and functions

oOUTPUT key

Press this key to select the effects signal output – the main speaker, the sub-speaker pair or all three speakers. Each time you press this key, the output destination setting changes and one or both of the indicators (MAIN, SUB) lights.

pEffect Knob 1

Adjust the first parameter of the selected effect. The panel shows each effect’s adjustable parameters. (See “Using effects” on page 16.)

aEffect Knob 2

Adjust the second parameter of the selected effect. The panel shows each effect’s adjustable parameters. (See “Using effects” on page 16.)

sEffect Knob 3

Adjust the third parameter of the selected effect. The panel shows each effect’s adjustable parameters. (See “Using effects” on page 16.)

Reverb section

Use to set the built-in reverb.

dREVERB knob

Adjust the reverb signal output level.

fSOURCE key

Select the reverb input signal.

Choose DIRECT to apply reverb to the guitar signal as it comes in the INPUT jack. Select EFFECT to apply reverb to the effects output signal. You can also select both to apply reverb to the dry guitar signal and the effect output.

gOUTPUT key

Press OUTPUT to choose the reverb signal output destination – the main speaker, the sub-speaker pair or all three speakers. One or both of the indicators (MAIN, SUB) lights to reflect the selection.

CD Trainer

h j k l z c

; x v b n

In addition to standard CD player functions, the CD Trainer also has a tuner, a metronome, an oscillator and other features.

hCD player cover

Lightly press the ø mark at the front of the cover to open the player.

jCD Trainer LCD

Shows the CD Trainer status.

kTIME/ESC key

When a time is displayed, press this key to change the time display mode.

When using a menu, press this key to return to the time display.

m , .

lLOOP I/O key

Use for loop playback.

Press this key to set the loop IN point (starting point) for the currently playing or paused CD. Press this key again to set the OUT point (ending point) and start loop playback automatically.

When IN and OUT points are set, press and hold this key to turn loop playback between the IN and OUT points ON and OFF.

When IN and OUT points are not set, press and hold this key to turn single track or all track repeat ON and OFF. (See “Repeat playback of a selected loop” and “All track or single track repeat playback” on page 18.)

10 TASCAM GA-100CD