6 – Using the CD trainer

Playing CDs

1Press ø at the front of the CD player cover lightly to open it.

2Place a CD in the tray and close the cover.

3Press ¥/π to start playback. Press ª to stop playback. Press ¥/π to pause playback.

Use µ(∆) and ≤(˚) to skip between tracks and search through them. Press briefly to skip to another track or press and hold to search a track.

NOTE

Opening the cover stops playback.

Adjusting the CD playback volume

When in a time display mode, use the and keys to adjust the CD playback level sent to the sub-speakers. The range is from 0 (no volume) to 10. The key

restores the default setting of 5. The value appears on the LCD moentarily when it is changed.

Changing the time display mode

Press TIME/ESC to cycle through the three time display

• Elapsed time (no indicator)

modes to the right.

•

Remaining track time (REMAIN indicator)

 

•

Remaining disc time (T. REMAIN indicator)

Repeat playback of a selected loop

Follow these procedures to repeat playback of a selected part of a disc (loop playback).

1Press LOOP I/O when a CD is playing or paused to set the loop IN point (starting point). The I-Oindicator on the LCD blinks.

2Press LOOP I/O again to set the loop ending point and start loop playback between the IN and OUT points. The I-Oindicator appears on the LCD during loop playback.

Stopping loop playback

Press LOOP I/O to stop loop playback, resume normal playback and erase the IN and OUT point settings.

All track or single track repeat playback

To retain the loop IN and OUT points, press and hold LOOP I/O when turning loop playback ON and OFF.

Repeat playback of the current track or all tracks on the disc is possible.

1In the Setup menu, use the PLAY item to select all track loop (ALL) or single track loop (SGL). The default setting is ALL. (See “Changing settings” on page 21.)

2Press and hold LOOP I/O to start all track or single track loop playback according to the above PLAY setting.

•Press ª to stop playback.

•Press and hold LOOP I/O to stop loop playback and resume normal playback.

NOTE

Pressing LOOP I/O when IN and OUT points are set will erase these settings.

Setting the tempo

Follow these procedures to set the tempo.

1Press and hold TEMPO. TMP appears and the tempo setting screen appears.

2Use , and keys to adjust the tempo.

3Press TIME/ESC after completing the setting to return to the time display.

Changing the tempo value from 0 turns tempo control ON, and playback speed adjusts to the new tempo. TEMPO appears on the LCD.

The tempo setting amount depends on whether Variable Speed Audition (VSA) is ON or OFF. (See "Changing tempo without changing key" on page 19.)

18 TASCAM GA-100CD