Use the Setup menu to change
Press and hold TUNER/SETUP to open the Setup menu. Press TUNER/SETUP again to cycle through the setting items. Use the 
and 
keys to adjust the values for each item and 
to restore the default setting.
Press TIME/ESC to finish making settings and close the Setup menu.
8 – Changing settings
Settings that can be made and saved:
•Playback mode selection
•Footswitch function selection
•Footswitch polarity setting
•Tuner mode selection
•Tuner speaker output ON and OFF
•Initialize effect bank settings
Playback mode selection
Use the PLAY item to select whether all tracks on a disc (ALL) are played or only the currently selected track (SGL) is played when using the loop playback function. The default setting is ALL.
Footswitch settings
Use the FOOT item to set the function of the CD/ EFFECT footswitch.
PLAY/PAUSE: Play and pause the CD
BANK+: Increase the active bank number by one
TUNER ON/OFF: Turn the tuner ON and OFF
You can use a dual footswitch with the CD/EFFECT footswitch jack. When using a dual footswitch, BANK+ and BANK- reverse which switch increases and which decreases the active bank number.
Footswitch polarity setting
Use the POL item, to set the footswitch polarity to normal (NOR) or inverse (INV). Use this to match the footswitch you use. The default setting is NOR.
Tuner settings
Use the TMOD item to set the tuner mode. (See “Using the tuner” on page 20.)
CHR: chromatic mode (default setting)
GTR: guitar mode
Tuner speaker output
Use the TOUT item to set whether or not the guitar signal outputs through the main speaker when the tuner is turned on. The default setting is OFF.
Initializing effect banks
Use the FXRS item to restore all effects banks to their factory settings.
NO appears on the LCD when you choose the FXRS item. Press the 
or 
key and YES will appear. Press and hold the 
key to restore all effects banks to their factory settings.
After initialization is complete, DONE appears on the LCD and the time display reappears.
CAUTION
Initializing effect banks erases all the preset bank settings that have been made. Use this function only if you are sure that you want to overwrite these settings with the factory defaults.
TASCAM