TASCAM
Controlled device (this unit) | Control device |
3. Command format
3.1 Command format overview
The serial protocol was designed to be able to function using common terminal programs. Therefore, all markers are printable
Parameter ID: A string of
Command: One character defines what the command does. This is the same for queries. Commands include “=” (set value) and “?” (query).
Value: Strings are of 1 to 24 characters, including query values. Spaces before and after character strings are ignored. Unless otherwise indicated, character strings do not distinguish between upper and lower case characters.
End Marker: One or two character strings. Both a carriage return followed by a
Below is an example of a typical message. There are no blank spaces inserted after the Parameter ID and Value character strings, and one end marker character string is used.
3 | TEAC Corporation |