1 − Introduction
Thank you for your purchase of the TASCAM
Before connecting and using the unit, please take time to read this manual thoroughly to ensure you understand how to properly set up and connect the unit, as well as the operation of its many useful and convenient functions. After you have finished reading this manual, please keep it in a safe place for future reference.
You can also download the Owner's Manual from the TASCAM web site (http://www.tascam.com).
Features
••
•• 8 headphone outputs
•• Maximum output of 250 mW + 250 mW (at 32Ω)
•• 2 pairs of inputs
•• INPUT 1 on XLR connectors or TRS phone jack inputs
•• INPUT 2 on XLR connectors or RCA pin jack inputs
•• Each headphone output channel also has direct inputs
•• Every input and output channel has an overload indicator and a signal indicator
•• Ground lift switch allows signal grounding to be turned ON or OFF for all channels at the same time
Included items
The included items are listed below.
Take care when opening the package not to damage the items. Keep the package materials for transportation in the future.
Please contact the store where you purchased this unit if any of these items are missing or have been damaged during transportation.
•• | Main unit | 1 |
•• | Power cord....................................................................... | 1 |
•• | A | 1 |
•• | A warranty card............................................................... | 1 |
•• | Owner's manual (this manual)......................................... | 1 |
About this manual
In this manual, we use the following conventions:
•• The names of keys and controls are given in the following typeface: POWER.
•• Additional information is introduced in the styles below when needed:
NOTE
Explanation of actions in special situation and supplement.
CAUTION
Instructions that should be followed to avoid injury, damage to the unit or other equipment.
Trademarks
•• TASCAM is a trademark of TEAC Corporation, registered in the U.S. and other countries.
•• Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners.
Precautions and notes for placement and use
•• The operating temperature should be between 5°C and 35°C (41°F and 95°F).
•• Make sure that the unit is mounted in a level position for correct operation.
•• Do not place any object on the unit for heat dissipation.
•• Avoid installing this unit on top of any
Cleaning the unit
To clean the unit, wipe it gently with a soft dry cloth. Do not wipe with chemical cleaning cloths, benzene, paint thinner, ethyl alcohol or other chemical agents to clean the unit as they could damage the surface.
4 TASCAM